This charge lead is designed to connect RC batteries with an EC5‑style plug to chargers that use standard 4 mm banana plug outputs. Built with thick, flexible silicone wire and quality molded connectors, it delivers reliable current flow for efficient battery charging. The durable construction helps ensure a secure connection and long service life even with frequent use in hobby charging setups. It’s ideal for RC enthusiasts who need a dependable EC5‑to‑banana plug adapter for their battery charger.
Specifications:
Capacity: 2300 mAh
Weight: 87 grams (including wire and connector)
Li-Po cell arrangement: 2S1P
Nominal voltage: 7.4 Volts
Discharge capability: 8C continuous (18.4A), 16C max (36.8A)
Dimension(mm): 85 x 30 x 17mm
Connector: JR Style with thick 20AWG Silicone Wire
Recommended Application: 1/10th & 1/8th scale vehicles that normally use a flat stick pack receiver battery, Helicopters and Airplanes
IMPORTANT: 1) DO NOT leave the battery in your model when charging 2) DO NOT leave unattended when charging 3) ALWAYS balance charge the battery 4) ALWAYS use a LiPo charging bag 5) YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!) 6) YOU MUST not over discharge the Li-Poly battery pack 7) READ & UNDERSTAND the instructions carefully before operating this battery
NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage